Commode and shower chair Kakadu Tilt with 24 inch rear wheel

Commode and shower chair Kakadu Tilt with 24 inch rear wheel

Classification
09 12 03 12 - Commode wheelchairs

Documents
Brochure
User manual


The product series contains 4 products. The product below meets the specified details.
Click show all products to see all products belonging to the product series.

Toilet og badestol med 24 hjul sæddebredde 38cm


HMI-no.
116362
Article-no.
3020S5

Registration date
04-06-2019
Last updated
11-09-2025

Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
150
kg
Total width
57
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
38
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
38
cm
If the seat depth is adjustable, this is the maximum seat depth
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
0
°
Measured from the horizontal position.
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
141
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Center for Testing and Certification, Warszawa. Test date: 26-01-2016 Test report for HMI-no. 116362

EU product safety regulation 
No information about CE-marking info
The supplier has not provided any information about CE-marking of the product. Explain CE-marking