MC 1144, R-Net, Spinalus

MC 1144, R-Net, Spinalus

Classification
12 23 06 08 - Powered wheelchairs, powered steering, class B (for indoor and outdoor use)



The product series contains 2 products.
The product series also includes a discontinued product. Include discontinued products. The product below meets the specified details.
Click show all products to see all products belonging to the product series.

MC 1144 R-Net, Spinalus-3 - 45 cm without seat


HMI-no.
141738
Article-no.
2400-1289

Registration date
04-11-2024
Last updated
11-09-2025

Properties
Programmable
Yes
Elevating seat
Yes
Powered recline
Yes
Powered tilt
Yes
Powered legrests
Yes
Optional motorized attendant control
Yes
Suspension
Yes
Front-wheel-driven
Yes
Mid-wheel-driven
No
Rear-wheel-driven
No
Can be used as seat in a car
Yes

Measures
User weight, max
150
kg
External width
63
cm
Measured where widest
External length
118
cm
Maximum external length with the seat in an upright position. Measured without leg supports
Weight
165
kg
Speed, max
10
km/t
Driving distance range, fully charged
45
km
The theoretical driving distance range as calculated through laboratory testing.
Seat height, min
43
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the lowest position.
Seat height, max
46
cm
The vertical distance between the floor and the seat surface measured at the front edge of the seat. Measured with the seat in the highest position.
Back rest recline, max
50
°
Recline of back rest from an upright position.
Tilt-in-space forward
0
°
Measured from the horizontal position.
Tilt-in-space back
50
°
Measured from the horizontal position.
Ground clearance
7
cm
Slope, max
6
°
Climbs obstacles of max
7
cm

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
ISO 7176-19:2022: Wheelchairs - Part 19: Wheelchairs for use as seats in motor vehicles.
Test lab: Dahl Engineering. Test date: 17-06-2022 Test report for HMI-no. 141738

EN 12184:2022: Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods.
Test lab: TÜV Rheinland Nederland B.V.. Test date: 11-12-2020 Test report for HMI-no. 141738

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 141738