Bariatric Shower Commode




Classification
09 12 03 07 - Commode shower chairs with castors, not height adjustable

Documents
Brochure
User manual


The product series contains 4 products. The product below meets the specified details.
Click show all products to see all products belonging to the product series.

XXL-Rehab Badetoiletstol med hjul. 61 cm


HMI-no.
47221
Article-no.
0150-061-000

Registration date
16-10-2007
Last updated
11-09-2025

Properties
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
325
kg
Total width
67
cm
Ground clearance
53
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
61
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
56
cm
If the seat depth is adjustable, this is the maximum seat depth
Seat height
55
cm
Wheel diameter
125
mm
Number of wheels with brake
2
Height of push handles/push bar, min.
100
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
100
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:1999: Technical aids for disabled persons - General requirements and test methods.
Test lab: Hjælpemiddel Instituttet. Test date: 19-07-2007 Test report for HMI-no. 47221

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device