Dino 3, wheelchair chassis for individual orthopedic seating solutions

Dino 3, wheelchair chassis for individual orthopedic seating solutions
Easily maneuverable aluminium chassis for indoor and outdoor use with most individual orthopedic seating solutions. For indoor and outdoor use. With height adjustable push bar and seat tilt. Accessories include individualized foot rest solutions, side panels and wheel types. Also supplied in a long version for large seat depth. Crash-tested.

Classification
12 22 18 06 - Frames for wheelchairs

Documents
Brochure


The product series contains 4 products. The product below meets the specified details.
Click show all products to see all products belonging to the product series.

Dino 3 - size 0


HMI-no.
50304
Article-no.
840000003503

Registration date
18-11-2008
Last updated
11-09-2025

Properties
Can be subsequently equipped with propulsion unit
No
Can be mounted on a stair climber
No
Intended for fastening in a car
Yes
Height adjustable
Yes
Indoor use
Yes
Outdoor use
Yes
Push handles
Yes

Measures
Total width
55.5
cm
The narrowest possible configuration.
Total length
100
cm
Weight
18.5
kg
The stated weight of the wheelchair is incl. wheels and leg supports.
Load, max
120
kg
Including seat, accessories, and person.
Height, min
43
cm
Measured from the floor to the top of the adapter unit in the lowest position.
Height, max
48
cm
Measured from the floor to the top of the adapter unit in the highest position.
Tilt-in-space forward
5
°
Measured from the horizontal position.
Tilt-in-space back
30
°
Measured from the horizontal position.

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device