Kakadu shower and commode chair

Kakadu shower and commode chair
Commode chair with 4 x 5 wheels, comes with a detachable bucket and lid. The wheels can be locked by pressing the locking pedals on each wheel. The commode has adjustable leg supports than can be detatched. The armrests can be folded away for easier access to the commode.

Classification
09 12 03 08 - Commode shower chairs with castors, non-electrical height adjustable

Documents
Brochure
User manual
Spare part catalogue
Service manual


The product series contains 4 products.
Click show all products to see all products belonging to the product series.

Kakadu shower and commode chair, seat width 50 cm


HMI-no.
62315
Article-no.
302019

Registration date
10-01-2019
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
150
kg
Total width
61
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
51
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
127
mm
Number of wheels with brake
4
Seat height, min
49
cm
Seat height, max
54
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information info
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: CBC, Warszawa, Polen. Test date: 26-01-2016 Test report for HMI-no. 62315

EU product safety regulation 
No information about CE-marking info
The supplier has not provided any information about CE-marking of the product. Explain CE-marking