Support handle



Stable support handle for getting in and out of bed.

Classification
18 12 28 02 - Grab handles for beds

Documents
Brochure


The product series includes 7 products of which 1 product is discontinued.

» Summarize specifications

Product 1 of 7
Stable support (25x30 cm)


HMI-no.
29754
Article-no.
021964.D0

Registration date
09-04-2001
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
25
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
30
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Stable support (25x30 cm)


Product 2 of 7
Stable support (40x50 cm)

The product was discontinued from Invacare A/S 19-12-2016


HMI-no.
29755
Article-no.
021963.D0

Registration date
09-04-2001
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
Yes
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
40
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
50
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking

Other specifications
Stable support (40x50 cm)


Product 3 of 7
Stable support for ScanBed 755/755D: 25x30 cm


HMI-no.
50948
Article-no.
021964-0154

Registration date
25-02-2009
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
25
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
30
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Can be used on both the right and left side of the bed


Product 4 of 7
Stable support for ScanBed 755/755D: 25x80 cm


HMI-no.
62140
Article-no.
1417510-0154

Registration date
01-11-2010
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
25
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
80
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Can be used on both the right and left side of the bed


Product 5 of 7
Stable support for ScanBed 755/755D: 40x30 cm


HMI-no.
62138
Article-no.
1417511-0154

Registration date
01-11-2010
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
40
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
30
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Can be used on both the right and left side of the bed


Product 6 of 7
Stable support for ScanBed 755/755D: 40x50 cm


HMI-no.
50949
Article-no.
021963-0154

Registration date
25-02-2009
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
40
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
50
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Can be used on both the right and left side of the bed


Product 7 of 7
Stable support for ScanBed 755/755D: 40x80 cm


HMI-no.
62139
Article-no.
1417512-0154

Registration date
01-11-2010
Last updated
18-02-2025

Properties
Only intended for use with specific products
Yes
Removable without tools
Yes
Vertical foldable
No
Indicates whether folding takes place with a vertical movement lowering the upper point of the grab handle
Lateral foldable
No
Indicates whether folding takes place with a movement both lowering and laterally moving the upper point of the grab handle along the bed
Rotational foldable
No
Indicates whether folding takes place with a 180 degrees rotational movement of the grab handle pivoting around its lower fixation point
Can be used in the left side of the bed
Yes
Can be used in the right side of the bed
Yes
Mounted directly on the mattress support platform
No
Indicates whether the grab handle follows the angle adjustment of the mattress support platform

Measures
Height
40
cm
Measured from the mattress support platform (without mattress) to the upper point of the grab handle. If the grab handle can be used with more beds, the measure gives the height when used with the bed giving the smallest measure
Length
95
cm

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Other specifications
Can be used on both the right and left side of the bed