Hera/160 bath- and toilet chair with tilt

This product series and all belonging products have been discontinued by Winncare Nordic ApS since 11-12-2014
Hera/160 bath- and toilet chair with tilt
Basic model mounted with tilt function.
Bath and toilet chair has four locking wheels. There is a wide range of accessories, as shown in the user manual.

Classification
09 12 03 11 - Commode shower chairs with wheels, tilt and electrical functions

Documents
User manual


The product serie includes 2 products. 2 of these products are discontinued from the supplier.

» All product details

Specifications summarized

Specifications for the 2 products in the product series. Click a HMI-no. to see all details for a single product.

Product 1 - 2
Specification/HMI-no.85203
discont.		85204
discont.
Height adjustable--
Tension adjustable back rest upholsteryYesYes
Can be used with standard wall-mounted toilets (without extension)NoNo
Possibility to change position of armrest to allow sideways transfer--
Powered tiltNoYes
Tilt-in-space dissociated from the height adjustment
The function of the tilt-in-space is separated from the hydraulic or electrical function of the height adjustment.
--
Head supportYesYes
Battery chargeable separated from the productNoNo
Emergency stopping function--
Fold-up foot supportsYesYes
Height adjustable legrests--
Elevating legrestsYesYes
Legrest position may be changed to facililtate hygiene and transferYesYes
User weight, max (kg)160160
Total width (cm)5858
Ground clearance (cm)
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
--
Width between arm supports (cm)
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
4747
Seat depth (cm)
If the seat depth is adjustable, this is the maximum seat depth
4242
Wheel diameter (mm)--
Number of wheels with brake44
Seat height, min (cm)48.548.5
Seat height, max (cm)60.560.5
Tilt-in-space forward (°)
Measured from the horizontal position.
55
Tilt-in-space back (°)
Measured from the horizontal position.
3030
Height of push handles/push bar, min. (cm)
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
--
Height of push handles/push bar, max. (cm)
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position
--
Ingress protection class for water (IP)
0-9 (IPX0-IPX9) according to the standard for degrees of protection provided by enclosures (IEC 60529)
06