Mobilex Kakadu Commode and shower chair

Mobilex Kakadu Commode and shower chair

Classification
09 12 03 08 - Commode shower chairs with castors, non-electrical height adjustable

Documents
Brochure
User manual
QuickGuide


The product series contains 4 products.

» Summarize specifications

Product 1 of 4
Aqua Toilet-badestol 55 cm


HMI-no.
100682
Article-no.
302020

Registration date
26-02-2016
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
200
kg
Total width
66
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
55
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
127
mm
Number of wheels with brake
4
Seat height, min
49
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 25-02-2014 Test report for HMI-no. 100682

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking

Product 2 of 4
Aqua Toilet-badestol med siddebredde 45 cm


HMI-no.
62314
Article-no.
3020U8

Registration date
12-11-2010
Last updated
20-10-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
130
kg
Total width
56
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
46
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
127
mm
Number of wheels with brake
4
Seat height, min
49
cm
Seat height, max
54
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 04-12-2019 Test report for HMI-no. 62314

EN 12182:2012: Assistive products for persons with disability - General requirements and test methods.
Test lab: Centre for Testing and Certification. Test date: 04-12-2019 Test report for HMI-no. 62314

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device

Product 3 of 4
Aqua Toilet-badestol med siddebredde 51 cm


HMI-no.
62315
Article-no.
302019

Registration date
12-11-2010
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
150
kg
Total width
61
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
51
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
127
mm
Number of wheels with brake
4
Seat height, min
49
cm
Seat height, max
54
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 26-01-2016 Test report for HMI-no. 62315

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking

Product 4 of 4
Commode and shower chair 38 cm


HMI-no.
102335
Article-no.
302015

Registration date
09-08-2016
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
130
kg
Total width
49
cm
Ground clearance
47
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
38
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
38
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
127
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
55
cm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
101
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Polish Centre for Testing and Certification. Test date: 24-09-2009 Test report for HMI-no. 102335

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking