Commode and shower chair Kakadu Tilt

Commode and shower chair Kakadu Tilt

Classification
09 12 03 10 - Commode shower chairs with wheels and tilt, no electrical functions

Documents
Brochure
User manual


The product series contains 2 products.

» Summarize specifications

Product 1 of 2
Aqua toilet- badestol med kip


HMI-no.
64256
Article-no.
302024

Registration date
12-04-2011
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
No
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
130
kg
Total width
56
cm
Ground clearance
45
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
46
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Seat height, min
54
cm
Seat height, max
59
cm
Tilt-in-space forward
5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Number of wheels with brake
4
Wheel diameter
100
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
104
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 08-05-2015 Test report for HMI-no. 64256

EU product safety regulation 
No information about CE-marking 
The supplier has not provided any information about CE-marking of the product. Explain CE-marking

Product 2 of 2
Commode and shower chair Kakadu Tilt


HMI-no.
100683
Article-no.
302025

Registration date
26-02-2016
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
Yes
Head support
Yes
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
No
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
130
kg
Total width
61
cm
Ground clearance
45
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
50
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
43
cm
If the seat depth is adjustable, this is the maximum seat depth
Seat height, min
54
cm
Seat height, max
59
cm
Tilt-in-space forward
5
°
Measured from the horizontal position.
Tilt-in-space back
25
°
Measured from the horizontal position.
Number of wheels with brake
4
Wheel diameter
100
mm
Height of push handles/push bar, min.
96
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
104
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information 
Though the product is testet, it might not have passed all requirements in the standard. Besides, some products are only tested according to parts of the standard. Read the test report for detailed information. See also other standards that could be relevant for this product type.
: Tested according to other national or international standard.
Test lab: Centre for Testing and Certification. Test date: 08-05-2015 Test report for HMI-no. 100683

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device