R82 Flamingo toilet- and bathing chair



Flamingo is a toilet- and bathing chair for children. The seat can be used over an ordinary toilet or in a bathtub. If Flamingo is to be used over a toilet, mount the toilet fittings and possibly foot support. If Flamingo is used in a bathtub, 4 suction cups are fitted for attachment.

Classification
09 12 03 08 - Commode shower chairs with castors, non-electrical height adjustable

Documents
Brochure
User manual
Spare part catalogue

Video
Play video


The product serie includes 6 products. 2 of these products are discontinued from the supplier.

» Summarize specifications

Product 1 of 6
Flamingo toilet- and bathing chair, size 1


HMI-no.
25386
Article-no.
31880001-NL

Registration date
20-01-2000
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
No

Measures
User weight, max
35
kg
Total width
44
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
25
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
27
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
86
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
96
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 25386

Other specifications
With Flamingo, the child has the opportunity to achieve a good sitting position, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, together wit


Product 2 of 6
Flamingo toilet- and bathing chair, size 2


HMI-no.
25387
Article-no.
31880002-NL

Registration date
20-01-2000
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
50
kg
Total width
46
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
28
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
32
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
89
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
99
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 25387

Other specifications
With Flamingo, the child has the opportunity to achieve a good sitting position, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, together wit


Product 3 of 6
Flamingo toilet- and bathing chair, size 4 with back reinforcement


HMI-no.
120939
Article-no.
31885504-NL

Registration date
06-01-2020
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
70
kg
Total width
54
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
34
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
42
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
95
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
105
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 120939

Other specifications
Flamingo size 4 is now equipped with reinforced back. A good sitting position is achieved, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, to


Product 4 of 6
Flamingo, size 3 - Use HMI: 120936

The product was discontinued from Etac A/S 30-03-2021


HMI-no.
25388
Article-no.
31880003-NL

Registration date
20-01-2000
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
60
kg
Total width
50
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
32
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
36
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
93
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
103
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 25388

Other specifications
With Flamingo, the child has the opportunity to achieve a good sitting position, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, together wit


Product 5 of 6
Flamingo, size 4 - Use HMI: 120939

The product was discontinued from Etac A/S 30-03-2021


HMI-no.
31251
Article-no.
31880004-NL

Registration date
06-11-2001
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
70
kg
Total width
54
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
34
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
42
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
95
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
105
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 31251

Other specifications
With Flamingo, the child has the opportunity to achieve a good sitting position, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, together wit


Product 6 of 6
Flamingotoilet- and bathing chair, size 3 with back reinforcement


HMI-no.
120936
Article-no.
31885503-NL

Registration date
06-01-2020
Last updated
11-09-2025

Properties
Height adjustable
Manuelt
Tension adjustable back rest upholstery
No
Can be used with standard wall-mounted toilets (without extension)
Yes
Possibility to change position of armrest to allow sideways transfer
No
Fold-up foot supports
Yes
Height adjustable legrests
Yes
Elevating legrests
Yes
Legrest position may be changed to facililtate hygiene and transfer
Yes

Measures
User weight, max
60
kg
Total width
50
cm
Ground clearance
60
cm
Measured from the floor to the lowest point under the seat. Measured without bedpan/collection receptacle.
Width between arm supports
32
cm
Smallest distance measured between the inside of the arm supports. If the arm supports are adjustable, this is measured with the arm supports in the widest position.
Seat depth
36
cm
If the seat depth is adjustable, this is the maximum seat depth
Wheel diameter
75
mm
Number of wheels with brake
4
Seat height, min
50
cm
Seat height, max
60
cm
Height of push handles/push bar, min.
93
cm
Measured from the floor to the upper surface of the grip. According to ISO 17966:2016 it shall be possible to push the chair with the grip 90 cm above the floor.
Height of push handles/push bar, max.
103
cm
Measured from the floor to the upper surface of the heigher grip with the chair in the highest position

Test information
No information about tests according to standards
The supplier has not provided documentation, that this product is testet according to a relevant standard. See examples of relevant standards for this product type

EU product safety regulation 
The supplier has provided the following information about CE-marking of the product. Explain CE-marking
CE marked as medical device
EU declaration of conformity for HMI-no. 120936

Other specifications
Flamingo size 3 is now equipped with reinforced back. A good sitting position is achieved, as the seat and back can be angled separately, whereby i.a. the hip angle can be adjusted individually. If the hip angle is set to less than 90 degrees, it will, to